# Wireless Industrial Vibration & Motor Health Sensor > Autonomous wireless 3-axis vibration and temperature sensor for continuous condition monitoring of industrial electric motors, centrifugal pumps, fans, compressors, and gearboxes. Evaluates ISO 10816-3 machine health zones on the device, signals status via high-visibility Green/Amber/Red LEDs on the housing, logs up to 32 MB of statistical velocity trends and raw 4,096-sample waveforms, and syncs wirelessly over Bluetooth Low Energy 5.2. ## Key Capabilities & Outcomes - **Early Fault Detection**: Samples X, Y, and Z axes at 8 kHz (4,096 samples per axis per capture), removes DC offset, integrates acceleration to velocity with a 5 Hz high-pass filter, and calculates broadband RMS velocity (mm/s), peak velocity (mm/s), and RMS acceleration to catch bearing wear, shaft misalignment, rotor unbalance, and mechanical looseness weeks before failure. - **On-Device ISO 10816-3 & Temperature Alarms**: Evaluates every capture directly on the sensor against ISO 10816-3 machine severity zones (Zone A/B Normal < 4.2 mm/s RMS, Zone C Alarm 4.2–9.5 mm/s RMS, Zone D Trip >= 9.5 mm/s RMS), custom user thresholds, and temperature limits. - **Shop-Floor Visual Triage**: Drives bright Green (OK), Amber (Alarm), and Red (Trip) status LEDs through the translucent frosted pearl-white ABS cap so plant personnel walking an aisle can spot a degrading motor or pump immediately. - **Rugged Epoxy-Potted Enclosure**: CNC-machined aluminium base paired with an injection-molded ABS cap. The internal assembly is fully epoxy potted to hermetically seal electronics against washdowns, moisture, and chemical ingress while rigidly coupling motor vibration without internal PCB resonance. - **Fast Retrofit Mounting**: Mounts directly to motor, pump, or gearbox casings via a central counterbored M5 socket head cap screw (DIN 912) or industrial structural adhesive on the flat machined aluminium base—no power wiring, conduit, or plant shutdown required. - **Multi-Year Autonomous Battery Life**: Powered by a wide-temperature Lithium Thionyl Chloride (Li-SOCl2) battery rated for continuous industrial operation from -40°C to +85°C. - **32 MB On-Board Flash & Bluetooth LE 5.2 Sync**: Stores months to years of statistical trend records and 4,096-sample diagnostic time-domain waveforms in 32 MB non-volatile flash memory for walk-by tablet collection or fixed industrial BLE gateway readout. ## Technical Specifications | Parameter | Specification | | :--- | :--- | | Indicators & Alarm Evaluation | Red / Amber / Green LEDs • ISO 10816-3, Custom User & Temperature Limits | | Wireless Connectivity | Bluetooth Low Energy 5.2 | | Axes, Sampling & Statistics | 3-Axis (X, Y, Z) @ 8 kHz (4,096 samples) • RMS/Peak Velocity, RMS Accel, Temperature | | On-Board Storage | 32 MB Non-Volatile Flash | | Battery & Operating Temp | Li-SOCl2 Battery (-40°C to +85°C) | | Enclosure & Sealing | Machined Aluminium Base + ABS Cap, Epoxy Potted | | Mounting | Bolted (Center M5 Screw) or Glued (Flat Base) | ## Machine-Readable Resources - [Full Technical Documentation & FAQ](/llms-full.txt): Detailed operating principles, signal processing pipeline, ISO 10816-3 severity thresholds, flash storage architecture, and deployment guide. - [Interactive Live Firmware Simulator](/#simulator): Browser-based WebAssembly build of the actual embedded device firmware executing real-time 8 kHz 3-axis sampling, velocity integration, ISO 10816-3 zone evaluation, and non-volatile flash logging. - [Technical Specifications](/#specs): Interactive 3D exploded CAD assembly and specification table. - [Pilot & Deployment Inquiry](/#inquire): Request sensor details, pricing, or a pilot evaluation for 1–100+ motors and pumps.